GETTING STARTED

The RadioDeck guide.

Your tracks. Your voice. Your first broadcast.

Find your way around the new interface and take it at your own pace, from your first track to going on air.

The real RadioDeck interface in French, with demonstration tracks. Available tools depend on your licence.
01Decks A / B
The current track and the one you are preparing.
02The on-air queue
Track order, Auto mode and transitions.
03The side panels
Library, scheduler, cartwall and mixer.
04Broadcasting
Configure your server, then go live.

Before opening your microphone.

Have your licence, some audio files and your radio hosting credentials ready. Connect headphones to prevent feedback.

Get a Free licence

01 / YOUR ACCESS

Step into your studio.

In your browser or the desktop app, start by checking your licence.

  1. Open RadioDeck.

    Visit the web version or open the application installed on your computer.

  2. Find “Ma licence RadioDeck” (My RadioDeck licence).

    Use the shield button in the top bar. Enter your key if this device has not yet been activated.

  3. Check your plan and available features.

    Free lets you explore the software. Some controls in this guide require additional features: check the plans if a tool is missing.

    Compare plans ↗

An active licence does not replace a radio server. To broadcast your programme online, you also need access to an Icecast or Shoutcast server.

02 / YOUR MUSIC

Get both decks ready.

Your library holds your tracks. The on-air queue determines what plays next.

  1. Add several files at once.

    Click + in the on-air queue, then select files on your computer. Wait for the import to finish before preparing your broadcast.

  2. Load a track into A or B.

    Select a queue row, then use “Charger dans A” (Load into A) or “Charger dans B” (Load into B) at the bottom. You can also drag a track onto a deck.

  3. Check the track before playing it.

    Check the title, duration and waveform. The library’s headphones button prepares a preview in deck B. Previewing and on-air playback are separate actions.

Library: choose a track while keeping your programme in view.

A file imported on this device is not automatically available on other devices. Cloud synchronisation is a separate feature, depending on your plan.

03 / YOUR MICROPHONE

Clear speech, without unwanted feedback.

Set up your input before sending the microphone on air.

  1. Open the mixer, then microphone settings.

    The mixer button is next to the microphone controls. In the console, open the settings for the Micro channel.

  2. Select the correct device.

    Choose your USB microphone or audio interface. Allow microphone access if your browser asks, then select “Tester le micro” (Test microphone).

  3. Speak at your normal level.

    Watch the input meter and adjust the gain to avoid clipping. Enable “Voix radio” (Radio voice) if you want to use this processing.

  4. Set up monitoring and music ducking.

    Headphone monitoring lets you hear yourself locally. If your audio interface already provides direct monitoring, leave software monitoring off. Adjust “Baisser la musique quand je parle” (Lower music while I speak) to suit your show.

Microphone input on the left; monitoring and on-air behaviour on the right.

Do not play your station’s public stream through speakers while the microphone is open: the playback delay can create an echo in your broadcast.

04 / YOUR SERVER

Connect RadioDeck to your station.

At the top of the app, “Configurer le flux” (Configure stream) opens the broadcast side panel.

  1. Choose RadioFlow or Manual.

    Choose the configuration for your hosting provider, then select the required server type.

  2. Enter your source connection settings.

    Use the broadcasting credentials from your hosting provider, not the public player address. Enter the correct port and HTTPS / SSL setting.

Fields to check

Server and port
Your station’s exact hostname and source port.
Mount point
For Icecast, the full path beginning with /, such as /live. This is not required for Shoutcast.
Credentials
The source password and, if required, the username in advanced settings.
Format and bitrate
Values supported by your server and suitable for your connection.
Offline local example: replace these values with those supplied by your hosting provider.

Finish with “Tester la connexion” (Test connection), then “Enregistrer” (Save).

If the test fails, check the connection log in the same panel. A successful test confirms the connection, not yet the audio your listeners receive.

05 / YOUR PROGRAMME

Build a smooth running order.

Prepare what comes next before starting your first track.

  1. Check the on-air queue order.

    Arrange tracks in broadcast order. Use a row’s bin to remove an item; “Vider la playlist” (Clear playlist) clears the queue, not the files on your computer.

  2. Choose Auto or Manual.

    Auto handles queue progression. Manual lets you decide when to move to the next track. Check the track prepared in B before starting.

  3. Adjust transitions if needed.

    Open the mixer’s Transitions tab. If available on your plan, the “Sans blanc” (Gapless) icon enables transition assistance; it does not replace listening to your files.

Cart player

Open the Cartoucheur (Cartwall) panel beside the queue. Prepare jingles and effects on the pads, then check their mixer level. A pad triggers audio: avoid testing it accidentally during a live broadcast.

Scheduler

Open Programmateur (Scheduler), then “Nouvelle programmation” (New schedule). Choose your content and timing rules. Review active schedules before your show to avoid unexpected playback.

The mixer stays accessible alongside your on-air queue.

06 / ON AIR

Ready to go on air.

Local playback is not the same as broadcasting to your server.

  1. Click “Diffuser” (Broadcast).

    The “Avant de diffuser” (Before broadcasting) window summarises your destination and local checks. Address relevant warnings before continuing.

  2. Start broadcasting, then your programme.

    Select “Démarrer la diffusion” (Start broadcasting) and wait for confirmation. Start the music if it is not already playing, then monitor audio levels and connection status.

  3. Check the public stream too.

    Listen through headphones, ideally on another device. The public player may be delayed: do not use it as microphone monitoring.

  4. Stop the broadcast in RadioDeck.

    Use the stop-broadcast command and check that the status is disconnected before closing the app. If your provider offers AutoDJ, also check that it resumes on the public stream.

Playing music locally, closing a panel or muting headphone monitoring does not necessarily stop your broadcast.

07 / YOUR GUESTS

A remote guest. You stay in control.

The microphone link, preview monitoring and going on air are three separate steps.

  1. Create a temporary microphone link.

    Open “Outils de production” (Production tools) beside the mixer, then “Animateur distant” (Remote presenter). Set the validity period and click “Créer le lien micro” (Create microphone link). Share the link only with your guest.

  2. Your guest prepares their microphone.

    They open the link in their browser, allow microphone access and select the correct input. They use headphones and can test local monitoring before speaking.

  3. Preview their audio privately.

    In RadioDeck, wait for the connection, then select “Écouter avant antenne” (Listen before going on air). Check the monitoring output. “Parler à l’animateur” (Talk to presenter) lets you reply without opening your microphone on air.

  4. Put their voice on air.

    Once your broadcast is active and levels are checked, select “Mettre à l’antenne” (Put on air). When finished, use “Retirer de l’antenne” (Take off air), then “Fermer le lien” (Close link) to end the session.

No invitation link was created for this demonstration screenshot.

The remote presenter screen is a different tool: it displays the broadcast but does not transmit microphone audio. For listeners, share your provider’s public player, never a private microphone link.

ON YOUR PHONE TOO

The same studio.
At your fingertips.

The decks and queue adapt to your screen width. Use mobile navigation to find the panels, then return to the on-air view.

When broadcasting, keep RadioDeck in the foreground, avoid locking the screen and use a stable connection. Background behaviour depends on your browser and operating system.

Open RadioDeck ↗

TROUBLESHOOTING

Need a hand?

My files will not import

Try one file first. Check its format, free device space and browser storage available to this site. Do not clear RadioDeck’s data without backing up your work.

Deck B is not preparing the next track

Check that there is a next track in the queue, Auto mode is on and the files are still accessible. Select the track and use “Charger dans B” (Load into B) to check playback.

My microphone produces an echo

Use headphones, stop public-stream playback on your computer and avoid simultaneous software and hardware monitoring. Make sure the selected device is your microphone, not an audio loopback input.

The server connection fails

Check server type, source port, credentials, Icecast mount point and SSL setting. Close your other broadcasting software if it is using the same mount point. Read the connection log before retrying.

I am connected but listeners cannot hear anything

Check that a deck is playing and that the channels and master output are not muted, then watch the mixer levels. Check the correct public stream, allowing for its buffer. A successful connection alone does not prove audio is present.

A tool in this guide is missing

Check your plan under “Ma licence RadioDeck” (My RadioDeck licence). Some tools require a plan that includes them; their position may also differ between desktop and mobile.

Would you like some help?

Tell us your device, browser and the exact message, without sending your broadcasting password.

Contact support ↗
Open RadioWay chat